Rotating-mass centrifugal load calculator

Point mass at fixed radius and angular speed.

dynamics-centrifugal-load.napkin / editable

SCENARIO COMPARISON

Compare the numbers.

This source describes an analytical model. Its quantities and checks are the view.

Scenario	forceN
	109.662
	87.7298

All calculated quantities are listed with the inputs. Switch to Source to inspect the equations.

SCENARIOS / CALCULATED VALUESSAME SOURCE

Change an input to see the consequences.

radial force budget109.66 N✓ passes

BASELINE INPUTS

mass0.2 kgradius50 mmspeed1000 rpm

CALCULATED

force109.66 N

Edits change the baseline source.

THE SOURCE

Edits below update the same model.

# Rotating-mass centrifugal load
# Scope: Point mass at fixed radius and angular speed.
# Status: illustrative worked example; engineering review pending.
# Inputs are example values. Checks are editable example requirements, not standards.

mass = 0.2 kg
radius = 50 mm
speed = 1000 rpm

force := mass*radius*speed^2 [N]

check radial force budget: force <= 150 N

scenario alternative: mass = 0.16 kg

Calculated from your source · not saved

Baseline · Baseline

radial force budget109.66 N ✓ passes

alternative · alternative

radial force budget87.73 N ✓ passes

Illustrative first-order example. Checks are editable requirements, not design standards. The broader topic may require additional equations, data, and validation.

Formula and units

This example uses the following equations. Input names and units match the editable source above.

force: force = mass*radius*speed^2 [N]

Original worked example

These are the baseline values in the downloadable source. Edits above let you test your own values.

Given

mass: 0.2 kg
radius: 50 mm
speed: 1000 rpm

Calculated

force: 109.662 N

Assumptions and limits

Point mass at fixed radius and angular speed.

The requirement checks use the limits written in this example. Passing a check does not establish that the model covers every load, material behavior, or operating condition in a real design.

Download this .napkin example ↓

Take it further with your agent

Napkin keeps the inputs, equations, checks and assumptions together in one study. Your agent sets it up; you change the numbers.

Try with Claude ↗

codex 'Use Napkin (https://napkin.engineering/mcp, or the local Napkin plugin) to build a study: Rotating-mass centrifugal load. Inputs: mass; radius; angular speed. Outputs: radial force; speed sensitivity. Model scope: Rigid-body dynamics with stated force and motion profiles. Read napkin_capabilities and the current snapshot. Ask me for the values that matter, label assumptions with units, author .napkin source, validate it and apply it with napkin_source using the current revision, then open the study. Add checks for the limits I supply. Keep unsupported analyses explicit.'

Claude needs the Napkin connector; Codex needs the Napkin plugin. Set up your agent ↗

The broader study

The topic brief below describes the broader scope. The worked example above states the particular calculation it implements.

Inputs: mass, radius, angular speed
Outputs: radial force, speed sensitivity
Modes: calculate, compare, sweep
Drawing: Motion and load plots

EXECUTABLE WORKED EXAMPLE · FIRST-ORDER MODEL · CHECK THE SCOPE & ASSUMPTIONS